Search for whether SOC 3 is better than SOC 2 and you will find vendors linking a SOC 3 badge on their marketing page while quietly keeping the SOC 2 report behind an NDA request form. That split is not an accident, and it is not a sign that one report has replaced the other. A SOC 3 is a free, public, shortened version of the same underlying audit that produces a SOC 2. It tells a visitor that the audit happened and that the auditor's opinion was clean. It does not tell a buyer which controls were tested, how they were tested, or whether any exceptions were noted. The two reports answer different questions, and a buyer who only ever sees the SOC 3 is working with a fraction of the evidence.
What a SOC 2 report actually contains
A SOC 2 report is written for a restricted audience: the vendor, its auditor, and whoever the vendor chooses to share it with, usually under NDA. It includes management's description of the system, the specific controls mapped to the Trust Services Criteria the vendor selected, the auditor's test procedures, and the results of those tests, including any exceptions. If it is a Type II report it also covers a period of months, not a single date, which is the difference explained in SOC 2 Type I vs Type II: what each one proves to a buyer. How to read a SOC 2 report in 20 minutes walks through the sections in order: the opinion letter, the system description, the control matrix, and the exceptions appendix, which is usually the part vendors least want a prospect to see without a signature on a confidentiality agreement first.
What a SOC 3 report actually contains
A SOC 3 report is built from the same engagement but stripped down for public release. It carries the auditor's opinion, a short management assertion, and a high-level description of the system. It leaves out the control-by-control detail and the test results entirely. That is by design: SOC 3 is meant to be posted on a trust centre or a marketing page without exposing the architecture detail a SOC 2 contains. What Is SOC 3, and Why Do Vendors Publish It Instead of SOC 2? covers why some vendors use SOC 3 as the only publicly visible artefact, and why that is a marketing choice rather than a security downgrade or upgrade.
Why the same vendor often publishes both
In the CertReports index on 2026-11-15, vendor pages that list a SOC 3 badge frequently also list a SOC 2 report as a separate line item, usually with a note that the SOC 2 is available under NDA. That pairing is the normal pattern, not the exception. The SOC 3 does the public-facing job: it answers the one-line question a procurement team asks before a deal even starts, which is whether an audit happened at all. The SOC 2 does the diligence job: it is what a security reviewer actually reads before signing off on a contract that involves customer data. Treating the SOC 3 as a substitute for that reading skips the part of the process the report was never designed to replace.
| Question a buyer needs answered | Can a SOC 3 answer it | Can a SOC 2 answer it |
|---|---|---|
| Did an independent auditor test controls | Yes, via the opinion letter | Yes, via the opinion letter |
| Which Trust Services Criteria were in scope | Yes, named at a high level | Yes, named and detailed |
| What specific controls exist for access management, encryption, change control | No | Yes, control by control |
| Were any exceptions noted during testing | No, exceptions are not disclosed | Yes, in the exceptions section |
| What period did testing cover (Type I vs Type II) | Sometimes stated, not always clear | Always stated explicitly |
| Can it be shared freely with a customer's customer | Yes, that is its purpose | Usually only under NDA |
What each report can and cannot tell a buyer evaluating the same vendor.
Reading a real pairing: what to look at on the trust centre
The card below shows how one vendor's trust centre states its SOC coverage, including whether the report type is named rather than just the framework. That distinction matters more than the badge itself: a page that says "SOC 2" with no report type leaves open whether the underlying report is a Type I snapshot or a Type II period, and a public SOC 3 badge next to it does not resolve that ambiguity because SOC 3 summarises the opinion, not the report type detail a reviewer needs.

Paylocity · Trust report
Finance and accounting · Public evidence as of 16 Nov 2026
Framework overview
CertReports state for each framework with public evidence: 1 verified, 3 vendor-stated.
3Documents and agreements
Legal and review documents Paylocity publishes or offers, as of 30 Sep 2026.
- Business associate agreement · Public
- Subprocessor list · On request
- Privacy policy · Public
1Security practices
Public statements from Paylocity, shown as statements, not attestations, as of 30 Sep 2026.
- Penetration testing · report available
When a SOC 3 is enough, and when it is not
- 1
Use the SOC 3 for first-pass screening
If you are triaging a long vendor list before a procurement cycle, a public SOC 3 badge is a fast, free signal that an audit exists. Use the bulk vendor security check to confirm the badge is current rather than a screenshot left over from a previous year. - 2
Request the SOC 2 before contract signature
Once a vendor is shortlisted and will touch customer, employee, or patient data, request the full SOC 2 report. How to get a vendor's SOC 2 report: AWS, Azure, NDA covers the usual request routes, including NDA portals and reseller pass-through. - 3
Read the exceptions section, not just the opinion
The opinion letter is the shortest part of a SOC 2 and the part a SOC 3 already gives you. The value a buyer is actually paying attention for sits in the exceptions appendix and the control descriptions.
- 4
Check the period covered and ask for a bridge letter if it has lapsed
A Type II report covers a fixed window. If the review happens after that window closes, what is a bridge letter, and how much should a buyer trust one explains what a vendor should supply to cover the gap. - 5
Compare against the framework list, not the marketing page
Cross-check what the vendor claims against the SOC 2 framework page and the SOC 3 framework page to see how the claim is recorded in public evidence rather than on a page the vendor controls.
- 5
- Trust Services Criteria
- Security, availability, processing integrity, confidentiality and privacy, the set a SOC 2 or SOC 3 scope is drawn from
- 1
- underlying audit engagement
- A SOC 3 is produced from the same engagement as the paired SOC 2, not a separate assessment
- 0
- control detail disclosed in a SOC 3
- No individual control descriptions, test procedures or exceptions appear in the public report
The mistakes buyers make when they stop at the badge
- Treating a SOC 3 badge as proof the vendor holds a certification. A SOC 2 is a report and a SOC 3 is a report; neither is a certificate, and a vendor describing itself as "SOC 2 certified" has mislabelled its own evidence, as covered in There is no such thing as 'SOC 2 certified'.
- Assuming the SOC 3 names the report type. Many trust centres list SOC 3 without stating whether the paired SOC 2 is Type I or Type II, which is exactly the gap a reviewer should close before relying on it.
- Skipping the exceptions review because the opinion was unqualified. An unqualified opinion can still sit alongside noted exceptions in the body of a SOC 2 that a SOC 3 will never show.
- Confusing SOC 3 scope with SOC 1 scope. SOC 1 covers controls relevant to financial reporting, not the security criteria a SOC 2 or SOC 3 addresses; SOC 1 vs SOC 2: what each report actually covers sets out the difference for vendors that publish both.
A SOC 3 report is designed for general use. It carries the auditor's opinion and a summary system description, but it leaves out the detailed description of controls and the results of testing that appear in the related SOC 2 report.
Neither report is "better"
Asking whether SOC 3 is better than SOC 2 is the wrong frame. They sit at different points in the same process: SOC 3 for public screening, SOC 2 for the diligence that precedes a signature. A vendor that only publishes a SOC 3 has not skipped an audit, but a buyer who only reads the SOC 3 has skipped the review.
What this means for how you run vendor review
Build the check into the same workflow you already use for other evidence gaps. A 30-minute vendor security review using public evidence treats the SOC 3 badge as a starting point, not an end point, and compare vendors side by side to see which vendors in a shortlist state a report type against their SOC listing and which leave it blank. The blank ones are not automatically a risk, but they are the ones worth a direct question before the contract stage.
People also ask
Is SOC 3 better than SOC 2?
Neither is better; they serve different readers. SOC 3 is a free, public summary built from the same audit as a SOC 2, meant for general distribution. SOC 2 holds the control detail, test results and exceptions a security reviewer needs before signing a contract. A SOC 3 badge is a useful screening signal, but it cannot replace reading the paired SOC 2 before data is shared.
What does SOC 3 cover?
A SOC 3 covers the same Trust Services Criteria scope a vendor selected for its SOC 2, typically security plus any of availability, processing integrity, confidentiality or privacy the vendor chose to include. It presents the auditor's opinion and a short system description but omits individual control descriptions and test results, which only appear in the full SOC 2 report.
Does SOC 3 cover SOC 2?
A SOC 3 is derived from a SOC 2 engagement, not a replacement for it. The two come from one audit: the SOC 2 is the detailed report with control descriptions and test results, and the SOC 3 is the condensed, public version of that same opinion. Holding a SOC 3 means a SOC 2 exists somewhere, usually available on request under NDA.
What is SOC 2 and SOC 3?
Both are System and Organization Controls reports issued after the same type of independent audit against the AICPA Trust Services Criteria. SOC 2 is the full, restricted-use report with control detail, intended for customers and auditors. SOC 3 is the short, general-use version of that report, intended for public posting on a trust centre or marketing page without exposing system detail.
Solomon Amos · Founder, CertReports
Solomon builds CertReports, the public evidence index for vendor security reviews. PhD in machine learning and cybersecurity, two years embedded at HMRC digital programmes, founder of TapTax. He writes about what registries, trust centres and auditors actually publish, and how buyers can use it before the questionnaire goes out.
Read next on CertReports
You might also like
When Is a Bridge Letter Required? The SOC Gap, Explained
Solomon Amos · 8 Nov 2026 · 9 min read